Merancang Sistem Pengukuran Redaman Transmisi Kabel Optik Single Mode Jenis Pigtail

  • aprinal adila asril politeknik Negeri Padang
  • Yustini yustini Politeknik Negeri Padang
  • Putri Azizah Herwita Politeknik Negeri Padang
Keywords: Fiber Optik, Optikal Termination Box, Optikal Power Meter, Optikal Time Domain Reflectometer

Abstract

Optical fiber is a transmission channel made of glass or plastic that is used to transmit light signals from one place to another. Optical fibers, in general, have a basic structure consisting of a fiber core, a fiber coating (cladding), and a protective layer (coating) consisting of an inner jacket. This research discusses the design of the attenuation of the fiber optic transmission measurement system by connection factor. Optical fiber cable used in this research is pigtail type cable with single-mode cable type. The cable used is 10 meters long, which will be installed in the Optical Termination Box. In the Optical Termination Box there are 6 pigtail cables, which are without connections, with a 6 cm sleeve protection one connection and two connections, also with a 4 cm sleeve protection one connection and two connections, then use a barrel adapter. In this design testing tools use Light source, Optical Power Meter, and Optical Time Domain Reflectometer). The attenuation value after testing on the protection sleeve 6cm; 12,330 dB, then the attenuation on the protection sleeve is 4cm; 12,729 dB. Then attenuation on the barrel adapter; 12,954 dB

References

[1] E. K. Wadhana, I. H. Setijono, and M. Sc, “KOMUNIKASI SERAT OPTIC MENGGUNAKAN METODE OPTICAL LINK,” pp. 1–11.

[2] R. E. N. P. Iswan Umaternate1, M. Zen Saifuddin2, Hidayat Saman3, “Sistem Penyambungan dan Pengukuran Kabel Fiber Optic Menggunakan Optical Time Domain Reflectometer ( OTDR ) pada,” vol. 0, no. 1, pp. 26–34, 2016.

[3] D. Sistem and K. Serat, Buku Ajar SKSO D4. 1880.

[4] F. Hilman, “Perancangan dan Implementasi Fiber Optic di Lab.Komunikasi Bergerak Gedung Elektronika Politeknik Negeri Balikpapan,” 2018.

[5] D. I. Pt, T. Indonesia, T. Area, N. Solo, T. Elektro, U. Diponegoro, J. P. H. Soedarto, S. Kode, and P. Telp, “TEKNIK PENYAMBUNGAN SERAT OPTIC DENGAN METODE PENYAMBUNGAN FUSI ( FUSION SPLICING ),” no. 195906191985111000, pp. 1–8.

[6] M. M. A. Lf, S. T. Mt, T. Elektro, U. Diponegoro, J. P. H. Soedarto, S. Kode, and P. Telp, “TEKNIK PENYAMBUNGAN METODE PENYAMBUNGAN MECHANICAL PADA SERAT OPTIC ( MECHANICAL SPLICING ),” pp. 1–9.

[7] I. Umaternate and Z. Mabud, “Sistem Komunikasi Serat Optic dengan Metode Power Link Budget pada Link Sofifi-Jailolo di PT . Telkom Sofifi,” vol. 4, no. 1, pp. 20–29, 2017.
Published
2019-12-05
Section
Electrical Engineering Articles