Rancang Bangun GPS Tracker Pada Kendaraan Bermotor Menggunakan SIM7000 NB-IoT Berbasis Arduino

Ana Febriana; Andi Ahmad Dahlan; Firdaus Firdaus

doi:10.30630/eji.13.2.225

Ana Febriana Politeknik Negeri Padang
Andi Ahmad Dahlan Politeknik Negeri Padang
Firdaus Firdaus Politeknik Negeri Padang

DOI: https://doi.org/10.30630/eji.13.2.225

Keywords: Arduino, GPS Tracker, SIM7000 NB IoT

Abstract

The rise of motorcycles today is in line with the increase in criminal acts such as motorcycle theft. Even though it is equipped with a security system such as a shutter key and ignition key, motorbikes can still be broken into by burglar specialists. When a motorcycle theft occurs, what the community can do is report the incident to the police and the community takes a long time to find the whereabouts of the missing motorcycle. Based on these problems, an additional security system was designed for Arduino-based motorcycles by utilizing GPS and SIM7000 modules. With the help of a simple application on the user's smartphone, this motorcycle security system can be tracked at any time even remotely. The results of this test obtained the coordinate points taken by the motorcycle during the route with the default time interval of 1 second. The coordinates obtained are displayed directly on google maps that are connected to the application and stored in the history application to anticipate if a motor vehicle theft occurs. The accuracy of taking coordinates on this tool is 85% when the quality of the network received is in good condition and 75% when the quality of the network received is in poor condition.

Downloads

Download data is not yet available.

References

[1] H. P. Muhammad Abojasin Juliyanto, Fikra Titan Syifa, “Perancangan Sistem Pengaman dan Pelacak Sepeda Motor Berbasis Modul GSM dan GPS,” 2018.
[2] W. I. Haris Isyanto, Akhmad Solikhin, “Perancangan dan Implementasi Security System pada Sepeda Motor Menggunakan RFID Sensor Berbasis Raspberry Pi,” 2019.
[3] M. M. Hossain, M. S. Islam, N. F. Dipu, M. T. Islam, S. A. Fattah and C. Shahnaz, "Design of a low cost anti-theft sensor for motorcycle security device," 2017 IEEE Region 10 Humanitarian Technology Conference (R10-HTC), 2017, pp. 778-783, doi: 10.1109/R10-HTC.2017.8289072.
[4] A. R. A. T. Ika Kholilah, “Aplikasi Arduino-Android untuk Sistem Keamanan Sepeda Motor,” 2016.
[5] A. Palchaudhuri and C. T. Manimegalai, "Smart Electric Motorcycle Security System Based on GSM and ZigBee Communication," 2018 International Conference on Communication and Signal Processing (ICCSP), 2018, pp. 0204-0208, doi: 10.1109/ICCSP.2018.8524460.
[6] Ramadaniati, F. (2021, June 28). The Design of Accident Detection and Tracking Systems on Motorcycles. Elektron : Jurnal Ilmiah, 30-36. https://doi.org/https://doi.org/10.30630/eji.0.0.205
[7] L. H. Budianto, M. Taufiq Tamam, “Sistem Penjejak Posisi Kendaraan Bermotor Berbasis GPS Melalui Media SMS,” vol. 1, no. 1, pp. 31–36, 2019.
[8] E. F. Y. A. Marhaposan Situmorang, “Designing Motorcycle Safety System Using Fingerprint Sensor, SMS Gateway, and GPS Tracker Based on ATMega328,” vol. 3, no. 1, pp. 9–14, 2021.
[9] A. O. Pachica, D. S. Barsalote, J. M. P. Geraga, J. M. Ong, and M. D. Sajulan, “Motorcycle theft prevention and recovery security system,” Int. J. Appl. Eng. Res., vol. 12, no. 11, pp. 2680–2687, 2017.
[10] D. V. S. Muhammad Arif Budiman, Auli Zatulo Harefa, “PERANCANGAN SISTEM PELACAK GPS DAN PENGENDALI KENDARAAN JARAK JAUH BERBASIS ARDUINO,” 2020.