Alat Tanam Jagung dengan Kontrol Jarak Tanam dan Kualitas Biji Berdasarkan Ukuran
Abstract
A corn planting tool has been made by controlling spacing and seed quality based on size. The aim of this research is to make a prototype corn planting tool with plant spacing and seed quality control based on microcontroller controlled size. The research method starts from making a prototype, and measuring system performance. The results of measuring the performance of the tool are indicated by an error in the reading of the HC-SR04 ultrasonic sensor at a point of 2 cm with an error value of 10% which is close to the actual measurement value, while for reading the distance on the ultrasonic sensor at a point > 2 cm it can be said to be constant to the actual distance. The test results of the BTS7960 motor driver work according to the system work description and are able to control the pulse width modulation (PWM) and the direction of rotation of the DC motor properly. The 28BYJ-48 stepper motor can operate the seed rationing system properly and accurately to rotate the motor at an angle of 90o takes 30 seconds. Overall the tool can function properly. Suggestions for further research, can be added monitoring of corn planting results based on the Internet of Things (IoT).
Downloads
References
[2] T. Bantacut, M. T. Akbar, and Y. R. Firdaus, “Pengembangan Jagung untuk Ketahanan Pangan, Industri dan Ekonomi,” J. Pangan, vol. 24, no. 2, pp. 135–148, 2015.
[3] N. Maghfiroh, M. L. Iskandar, and U. Made, “Pengaruh Jarak Tanam Terhadap Pertumbuhan dan Hasil Tanaman Padi (Oryza sativa L.) Pada Pola Jarak Tanam yang
Berbeda dalam Sistem Tabela,” J. Agrotekbis, vol. 5, no. 2, pp. 212–221, 2017.
[4] H. Tanaman et al., “Pengaruh Jarak Tanam dan Jumlah Benih Perlubang Tanam Terhadap,” vol. 11, no. 2, pp. 164–178, 2018.
[5] A. A. Yudianto, S. Fajriani, and N. Aini, “Pengaruh Jarak Tanam dan Frekuensi Pembumbunan terhadap Pertumbuhan dan Hasil Tanaman Garut (Marantha arundinaceae L.),” J. Produksi Tanam., vol. 3, no. 3, pp. 172–181, 2015.
[6] H. W. Pratama and M. Baskara, “PERTUMBUHAN DAN HASIL TANAMAN JAGUNG MANIS ( Zea mays saccharata Sturt ) THE EFFECT OF SEEDS SIZE AND DEPTH OF PLANTING ON GROWTH AND YIELD OF SWEET CORN ( Zea mays saccharata Sturt ),” J. Produksi Tanam., vol. 2 No. 7, no. Jagung, pp. 576–582, 2014.
[7] S. Suhendra and F. Nopriandy, “Rancang Bangun dan Uji Kinerja Tugal Semi-Mekanis dengan Sistem Penjatah Berputar untuk Kacang Hijau (Vigna radiata L.),” Positron, vol. 8, no. 1, p. 37, 2018, doi: 10.26418/positron.v8i1.23849.
[8] S. Audah, R. E. Rahma, A. Bakti, and R. Darma, “Rancang Bangun Alat Penanam Benih Kacang Tanah,” Inotera, vol. 2, no. 2, pp. 22–25, 2017, doi: 10.31572/inotera.Vol2.Iss2.2017.ID34.
[9] A. T. Sorowako, “Penggerak Manual Dan Motor Bakar,” vol. 10, no. 1, pp. 23–29, 2018.
[10] T. P. O. Sianipar and Z. Fatoni, “Perancangan Alat Penanam Benih Jagung Dan Penyiraman,” Turbul. J. Tek. Mesin, vol. 2, no. 1, p. 25, 2019, doi: 10.36767/turbulen.v2i1.523.
[11] M. R. W. W. A. W. A. W. K. Heru Purwanto, “Komparasi Sensor Ultrasonik Hc-Sr04 Dan Jsn-Sr04T Untuk Aplikasi Sistem Deteksi Ketinggian Air,” J. SIMETRIS, vol. 10, no. 2, pp. 717–724, 2019.
[12] I. H. Santoso and A. I. Irawan, “Analisis Perbandingan Kinerja Sensor Jarak HC-SR04 dan GP2Y0A21YK Dengan Menggunakan Thingspeak dan Wireshark,” J. Rekayasa Elektr., vol. 18, no. 1, pp. 43–52, 2022, doi: 10.17529/jre.v18i1.23359.
[13] D. H. Yapriono and J. Dewanto, “Perancangan Spion Elektrik Tipe Tanduk pada Bus Pariwisata Berukuran Besar,” J. Tek. Mesin Univ. Kristen Petra, vol. 16, no. 1, pp. 1–8, 2016, doi: 10.9744/jtm.16.1.9-16.
[14] F. Ahmed, M. A. Safiullah, S. H. Khan, A. Moinuddin, and A. M. Farhan, “Assembly of robotic arm based on inverse kinematics using stepper motor,” Proc. - UKSim-AMSS 6th Eur. Model. Symp. EMS 2012, pp. 285–290, 2012, doi: 10.1109/EMS.2012.36.
[15] M. Irmansyah, E. Madona, and A. Nasution, “Design and application of portable heart rate and weight measuring tool for premature baby with microcontroller base,” Int. J. GEOMATE, vol. 17, no. 61, pp. 195–201, 2019, doi: 10.21660/2019.61.ICEE12.
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.